1 / 3
Name: BlueSCSI Ultra Amiga 3000 Rear Mounting Brackets — zdjęcie 1
1 / 3

Name: BlueSCSI Ultra Amiga 3000 Rear Mounting Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds your BlueSCSI Ultra at the rear allowing access to the SD card and USB C port.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Trays to hold your BlueSCSI Ultra in the rear expansion slot space in your Amiga 3000. Your SD card and USB C port will be accessible from the rear of the machine. No more taking the case off! Well not for this at least.

Printed in Elegoo PLA+. You may want to use a more heat resistant material if your machine will be hot.

One model for the top slot.

One model for either of the middle two slots.

The part is printed quite thinly so do take care when fitting.

I suggest:

- Install the card with 3 x 6mm M3 screws into the bracket

- Attach SCSI and power cables

- Install bracket into slot

- Secure with screw

The top slot requires using the Berg power connector rather than Molex unless you like your Amiga to run without a case lid :)

Non-commercial remixes are permitted. Feedback and improvement suggestions are welcome.

Post your pictures. I'd love to see this being used.

Tagi