BOO BELLY – Lollipop holder & wrapper opener

A little monster with a place for your lollipop — and the wrapper you always end up looking for.

BOO BELLY is a lollipop holder, wrapper keeper and wrapper opener in one character. The printed teeth between its ears are designed to start an opening in the wrapper. Its belly keeps that wrapper handy and gives your lollipop somewhere to rest when you want a break.

Open. Tuck away. Take a break. Wrap again.

1. Open the wrapper. With the lollipop still wrapped, gently catch the wrapper on the small printed teeth between the ears to help start an opening. The teeth are for the wrapper, not for cutting the stick. Do not force it.

2. Keep the wrapper. Tuck the original wrapper into the belly while you enjoy your lollipop.

3. Park your lollipop. Taking a break? Spread the wrapper in the belly and rest the lollipop inside it, keeping the wrapper between the candy and all printed surfaces. Guide the stick through the rear opening if it fits.

4. Wrap it again. The original wrapper is still there when you need it. Reuse it only while it is clean, intact and large enough to cover the candy; otherwise use a clean food-suitable replacement.

Plush looks, printed texture

The irregular, fuzzy-looking relief is part of the actual geometry — not a render effect. It covers the body, waving arms and upper ears while leaving the working details smooth. The texture looks like plush, but the PLA print is hard.

Four actual filament colours give BOO BELLY its face: an ivory body, black eyes and smile, orange cheeks and belly rim, and two small white highlights inside the black eyes.

Files included

• Bambu Studio 3MF: the configured four-colour project for Bambu Lab H2S + AMS with a 0.4 mm nozzle.

• Single-colour STL: one joined model in its printing orientation, ready to slice for your own printer.

• Four-colour STL ZIP: four colour parts in shared coordinates. Import all four together as parts of ONE object; do not arrange them as separate objects or print the eyes separately.

• Printing and use instructions: colour mapping, orientation and precautions.

Printing the supplied H2S project

Open BOO_BELLY_v07_Plys_4barvy_H2S_AMS_0p4.3mf as a complete project in Bambu Studio, not geometry only.

• Printer: Bambu Lab H2S + AMS; 0.4 mm nozzle.

• Material: four colours of PLA; supplied presets use Bambu PLA Basic.

• Layer height: 0.20 mm. Infill: 15%.

• Orientation: flat back on the bed, face up.

• Supports: OFF. Purge/prime tower: ON.

• Supplied build plate: Textured PEI Plate.

• AMS slots: 1 ivory, 2 black, 3 orange, 4 white. Map these to your actual spools.

Slicer estimate: 5 h 56 min and 170.92 g total PLA, INCLUDING flushing waste and the tower. That is not the mass of the finished monster. Your actual time and usage may differ.

The supplied four-colour profile has been digitally checked and re-sliced for H2S only. When using another printer, filament or build plate, select matching settings and re-slice; no other v07 printer profile is claimed as validated. The gallery now includes photographs of an actual four-colour print, showing the textured surface, belly recess, rear stick opening and lollipop placement. These photos do not establish wrapper-opening performance, long-term durability or direct-food-contact safety. The photographed sample uses red accents; the supplied project assigns orange to this colour part. Map it to your preferred actual filament.

Before use

Use the original wrapper as a barrier between candy and the print. Direct food contact has not been validated, and the open belly is not an airtight storage container. Lollipop sizes vary: check the fit without forcing the stick. Small printed teeth can break; inspect them before use and stop if damaged. This is not a certified toy; children need adult supervision.