LEGO Duplo Style Triple-Tone Chord Whistle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three-tone Duplo-style whistle with six 9.40 mm studs, revised airflow and a single-piece, support-free print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Three voices in a bigger brick
A chunky, one-piece whistle with six hollow studs in a Duplo-style arrangement. One mouthpiece feeds three separate resonant chambers for a bright, chord-like sound.
Developed alongside the smaller brick-style chord whistle, this version went through repeated printed prototypes, fit checks and spectrogram measurements. The highest voice has a revised air supply that felt easier to play in prototype testing.
Sound and playing
Measurements of the individual voices were close to a minor-triad frequency ratio. When all three voices play together, pitch and balance change with breath pressure; an exact fixed key or a perfectly tuned chord at every pressure is not specified.
Start gently and increase your breath to find a comfortable three-voice sound. Very soft blowing may not start every voice together. The finish inside the windways also affects the response.
Features
Overall dimensions: 31.8 × 59.8 × 14.1 mm.
Three separate resonant chambers and one shared mouthpiece.
Six hollow studs with a 16 mm centre-to-centre spacing.
Stud outside diameter: 9.40 mm, reduced from earlier prototypes to ease the fit.
Revised air supply for the highest voice.
Single-piece print with no assembly or moving parts.
Designed to print without supports.
Recommended print settings
Orientation: as supplied, flat underside on the bed and studs facing up.
Nozzle: 0.4 mm.
Layer height: 0.20 mm.
Walls: 3 perimeters.
Top and bottom: 5 solid layers each.
Infill: 10% gyroid.
Supports: off, including inside the air passages.
Brim: normally unnecessary with good bed adhesion.
Seam: keep away from the stud contact surfaces, mouthpiece and whistle windows where possible.
Scale: 100% to preserve the windway and stud dimensions.
Stud fit
The included file uses 9.40 mm studs. This revision is intended to reduce insertion force compared with the earlier, larger studs; the final fit depends on your printer, filament and the bricks used.
Before printing a batch, make a quick fit test by cutting a slice in your slicer that includes the top plate and at least four studs. Test it with a 2 × 2 brick so that all four studs engage together.
Material and finishing
PLA is the recommended starting point for clean small details. The recent prototype tests were reported as PLA. PETG can also be tried with a well-tuned profile, but recheck the stud fit and inspect the windways for stringing or sagging.
Use dry filament and a calibrated flow setting. Keep the air passages and all three whistle windows clear. Carefully remove loose strings without rounding the sound-producing edges.
Included file
duplo_chord_whistle_tuned_v3_soft_940.stl — complete whistle with 9.40 mm studs, ready to slice.
Not affiliated with or endorsed by the LEGO Group.
