32mm TRV Wrench / Radiator Thermostat Spanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a spanner for most radiator thermostats.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I was replacing my manual dial with a smart thermostat and realised I didn't have the right tool to unscrew it.
IMPORTANT NOTE: This is a plastic spanner! It will buckle under excessive force, which is actually ideal as you shouldn't overtighten this connection. If your current thermostat is screwed on tightly, you can apply additional pressure with your fingers on the sides of the wrench to help get it moving.
Printing Tips:
Increase wall lines/perimeters (I used 5).
Infill: Use Triangles or any pattern that provides structural support in the direction of the turning motion.
Keep it simple: Don't overbuild it. The intent of this model is for those few rare times you actually need it, keeping it a small, quick, and cheap print ;)