Polymaker Reusable Master Spool – OpenPrintTag Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polymaker master spool with a pocket for the Prusa OpenPrintTag (NFC), new hole pattern and logo inlay for multicolor.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reusable master spool for Polymaker refills with a flush pocket for the Prusa OpenPrintTag (NFC) on side B, a rebuilt hole pattern and separate logo inlays for multicolor printing. See "Differences from the original" above for all details.
Files
polymaker-refill-spool-v2-openprinttag.3mf: all parts (flanges A/B perforated and solid, insert, logo inlays)
polymaker-refill-spool-v2-openprinttag.step: the same parts as a CAD file
Printing
For the multicolor logo, load the flange and its "Logo Inlay" as one object in the slicer and assign a different filament to the inlay.
If you use the spool in a filament dryer, print it in a heat-resistant material such as PETG or ASA. The tag itself withstands up to 80 °C.
Tips
Stick the tag centered in the pocket. One tag per spool is enough; according to Prusa it can be read even through a full spool.
Specification: https://specs.openprinttag.org/#/physical_spec
Credits: Original model by Polymaker (including the community contributors credited there). OpenPrintTag is an open standard by Prusa Research.