Polymaker Reusable Master Spool – OpenPrintTag Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Polymaker master spool with a pocket for the Prusa OpenPrintTag (NFC), new hole pattern and logo inlay for multicolor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reusable master spool for Polymaker refills with a flush pocket for the Prusa OpenPrintTag (NFC) on side B, a rebuilt hole pattern and separate logo inlays for multicolor printing. See "Differences from the original" above for all details.
Files
polymaker-refill-spool-v2-openprinttag.3mf: all parts (flanges A/B perforated and solid, insert, logo inlays)
polymaker-refill-spool-v2-openprinttag.step: the same parts as a CAD file
Printing
For the multicolor logo, load the flange and its "Logo Inlay" as one object in the slicer and assign a different filament to the inlay.
If you use the spool in a filament dryer, print it in a heat-resistant material such as PETG or ASA. The tag itself withstands up to 80 °C.
Tips
Stick the tag centered in the pocket. One tag per spool is enough; according to Prusa it can be read even through a full spool.
Specification: https://specs.openprinttag.org/#/physical_spec
Credits: Original model by Polymaker (including the community contributors credited there). OpenPrintTag is an open standard by Prusa Research.