Hexagon Wall Shelf – One-Piece Faceted Honeycomb Niche, 108 mm Deep, Optional Hidden-Screw Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seamless faceted hexagon niche, 108 mm deep: three cup-washer screws on show, or an accent panel that hides them all.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A modern hexagon wall shelf printed as one seamless PETG piece - no six boards, no joints, no thin bars. It is 186 mm across flats, 207 mm corner to corner and 108 mm deep, with a 14 mm front wall that steps down in three light lines (a 1 mm arris, a 4 mm flat band and a 45° facet) and a hidden shadow plinth that floats it 8 mm off the wall. All outlines share one concentric radius family, so the front band stays exactly 4 mm wide round every corner.
Version A: the hexagon alone; the only visible hardware is three cup-washer screws in shallow seats (two tucked into the ceiling corners, one just above the floor line).
Version B: the same hexagon plus a 4 mm accent panel in any colour that floats inside on a constant 3 mm reveal and hides every screw. Three bought O-rings hold it (no magnets, no clips); it lifts out with the included printed panel key, so the screws stay serviceable.
Validation status (please read): designed and checked in CAD and in the slicer; the load table is a calculation. It has not been physically printed or tested. Print the flange coupon first. All pictures are renders of the CAD model or drawings made from it; the plants, pots and objects are generic stand-ins - none is a photograph.
Features
Deep niche: 158 mm clear height, 77 mm wide floor, usable floor depth 91 mm (A) / 84.5 mm (B).
Version B shows no hardware at all (checked on the CAD by ray casting up to 75° off-axis), yet every screw is reachable by lifting the panel out.
Load path: a steel-bushed datum screw takes the weight; two corner screws about 130 mm higher take the tipping moment.
Honeycomb made easy: a paper drilling template per cell, a printed gap key (14 or 24 mm gaps), V marks on the back that line up with the template, and upper seats where screw and washer can shift ±1 mm to absorb drilling error.
Ready-to-print projects for A, B and the A-to-B panel upgrade; a flange coupon checks the bush, washers, panel fit and O-ring grip before the long ring print.
Calculated display load (per hexagon)
Evenly spread, the same for A and B. Design intent, not physically tested; PETG printed with the embedded settings, indoors, part temperature up to 50 °C. Up to 2 kg may stand on the top (counted in the total).
Wall and fixing (3 per unit) | Rated display load |
|---|---|
Concrete (C20/25 or better), solid brick, sand-lime brick - 6 mm universal plugs (6 x 30 class) | 8 kg |
Solid timber (a timber wall or a board of 22 mm or more behind the finish) - all three screws in timber, 35 mm or more of thread | 8 kg |
12.5 mm plasterboard (incl. stud walls) - 3 M5 metal cavity anchors | 6 kg |
Aerated concrete - 3 AAC-specific anchors | 6 kg |
Vertically perforated clay brick - 3 long 6 x 50 plugs, rotary drilling only | 5 kg |
Plastic plugs in plasterboard, adhesive strips, nails | not permitted |
Every figure is a cap: the calculation (anchor maker recommended loads, a PETG creep model and a finite-element study of the ring) leaves margin below it on every wall. Tiled walls: use the rating of the wall behind the tiles.
Which files?
Ready-to-print PrusaSlicer projects (settings embedded per object, every plate slice-checked): facet_hex_A_complete.3mf (2 plates, 482 g), facet_hex_B_complete.3mf (3 plates, 545 g), facet_hex_B_upgrade_panel.3mf (1 plate, 63 g). Print plate 1 (flange coupon + keys, about 3.5 h) first.
Drilling templates (PDF, print at 100 % and check the 100 mm scale bar): template_g24_A3 / template_g24_2xA4 (24 mm gap, 210 mm pitch - the default) and template_g14_A3 / template_g14_2xA4 (14 mm gap, 200 mm pitch).
STL files: ring, panel, panel key, gap key, flange coupon.
model.py + geom.py: the parametric CadQuery source (washer size, gap, panel).
Print settings
PETG for every part; matte PETG for the premium look. The panel must be PETG too, so it shrinks like the ring and its pins line up - no PLA panel.
0.4 mm nozzle, 0.20 mm layers, no supports, no pause. Ring: 4 perimeters, 15 % gyroid (embedded).
Ring and flange coupon back-down (wall face on the bed); panel face-down on a textured sheet (on smooth PEI or glass use a glue-stick release layer); keys flat.
A big print: the ring is 433 g of PETG and about 29 h on the slow generic 220 mm profile used for checking (A about 33 h in total, B about 37 h). Fast modern printers need a fraction of that time; the filament amount does not change.
Hardware (bought, per unit)
3 x 5.0 mm countersunk Torx (TX25) screws - stainless on light colours, black on dark ones.
3 x cup washers for 5 mm / No.10 countersunk screws, OD up to 15.0 mm, height up to 3.2 mm (common size 14.7 x 3.2).
3 x wall plugs / anchors for your wall (see the load table).
1 x steel spacer bush 8.0 x 5.3 x 5.0 mm (OD x ID x length) - or 5 mm cut from 8 mm steel tube with a bore of 5.2 mm or more.
Version B only: 3 x NBR70 O-rings 5.5 x 1.5 mm (+3 spares); firm-fit alternative 5.28 x 1.78 (AS568-009).
Wall and plug | Screw |
|---|---|
Concrete / solid brick / sand-lime, 6 x 30 plug | 5.0 x 45 |
Perforated clay brick, 6 x 50 long plug | 5.0 x 65 |
Solid timber (35 mm or more of thread in timber; add the lining thickness) | 5.0 x 50 |
Aerated concrete | a 5 mm countersunk screw of the AAC anchor's length for a ~9 mm fixture |
Plasterboard | an M5 countersunk machine screw (ISO 10642) of the length the cavity anchor's table gives for a ~9 mm fixture |
The fixing needs a countersunk head in the cup washer: if an anchor comes with a pan-head screw, replace it. Plaster, tiles or render count as fixture thickness - add their thickness and set the plug in the solid wall. Tools: drill and bits for your plugs, spirit level, pencil, masking tape, cable and pipe detector, a TX25 bit on a slim extension of 150 mm or more (bit holder no wider than 22 mm - the upper heads sit about 100 mm deep inside the niche).
Assembly
Each screw hole is closed at the back by a thin print membrane. Open all three to the full bore first: the datum hole to 8 mm (turn an 8 mm drill bit by hand, or cut it out with a craft knife) so the bush sits flush, the two upper holes to 7 mm. Same on the coupon.
Print plate 1 first. Press the bush into the coupon's datum seat and seat a cup washer and screw. Version B: roll the O-rings into the panel-pin grooves, press the panel onto the coupon and hook it out with the panel key - it should hold firmly (about 3-10 N on a luggage scale). Too loose: use the 5.28 x 1.78 rings.
Print the template at 100 %, tape it to the wall, level its line with a spirit level, check for cables and pipes at the three marks, drill and fit the plugs or anchors for your wall. Honeycomb: butt the next template edge to edge with the dashed cell.
Press the steel bush into the ring's datum seat (the hole just above the floor line), flush with the spot-face floor.
Drive the datum screw with its cup washer through the bush - snug. Level the ring across its top flat, then drive the two upper screws with cup washers using the slim extension - snug, never crushing.
Honeycomb: hang the next unit on its datum, set the gap with the gap key between parallel faces, then drive its upper screws.
Version B: press the panel in, notch at the top, pins into the window corners, until it seats on its three bosses. To remove it, empty the shelf, slide the panel key through the top notch until it stops, let it drop and pull gently.
Use: small plants in a closed cachepot or a pot with its own saucer (no water inside the niche), ceramics, collectibles, perfume, small decor - within the load table for your wall. Check the level after one week and after one month.
Limitations
Not physically printed or tested; the load table is a calculation - real walls, plugs and prints vary.
The B panel's O-ring grip is a calculated range (about 3-10 N) - check it on the coupon. A coin cannot remove the panel; use the panel key.
Use the fixing set for your wall; plastic plugs in plasterboard are not permitted. Check for hidden cables and pipes.
Not a step, handle or grab rail; never pull down on the front edge. Do not mount it over a bed, cot or seat; keep it out of children's reach. O-rings, bush, keys and screws are small parts.
PETG only; indoors; not above a radiator, in direct sun or behind glass; LED candles only.
A niche for small objects: books larger than about 70 x 150 mm do not fit.
Honeycomb gaps can vary by up to about 1 mm with normal drilling; the gap key shows it but cannot correct a mis-drilled datum.
Pictures
Renders of the CAD model and drawings, not photographs: three Version B hexagons with accent panels (cover), one Version B unit, the lift-out panel exploded, Version A with its screws, a five-cell honeycomb, the print plates, the dimensions, the calculated loads and the hardware card.