1 / 2
Gift Card Box - Print-in-Place Hinge, Snap Lid, No Supports — zdjęcie 1
1 / 2

Gift Card Box - Print-in-Place Hinge, Snap Lid, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hinged gift card box that prints fully assembled and snaps shut. Ribbon lid with an optional 2-color trick. No supports.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Turn a gift card into a real present. This little hinged box prints in one piece with a working print-in-place hinge, then snaps shut with a soft click. It's also great for cash, tickets, jewelry, or a handwritten note.

Features

  • Fits a standard 85.6 x 54 mm gift card or credit card, even in a sleeve. Inner space is 88.8 x 56.8 x 18.8 mm

  • Pin-free print-in-place hinge: 5 barrel knuckles with cone pins, 0.4 mm clearance, and 45-degree teardrop webs so there's nothing to support

  • The hinge swing was checked from 0 to 180 degrees with no collisions

  • An inner lip with two snap bumps keeps the lid closed, and a pull tab makes it easy to open

  • A ribbon pattern recessed 0.4 mm into the lid

  • Closed size about 96 x 77 x 22 mm, including the hinge and pull tab. It prints open and flat, 96 x 144 mm

Print settings

  • PLA, 0.2 mm layers (first layer 0.2 mm), 2-3 walls, 15% infill, no supports, no brim. Print as oriented

  • Don't over-squish the first layer. If the knuckles are tight, flex the lid back and forth a few times

2-color ribbon trick (any printer)

Add a filament change at the start of layer 3 (Z = 0.4 mm) to gold or silver, then another change back to the box color at layer 4 (Z = 0.6 mm). The ribbon is recessed into the first two layers, so only the ribbon shows the second color. It also leaves a thin pinstripe around the lid edge. Works with M600 or an AMS.

If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.

About the images

All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors are shown for illustration. Real print photos will be added as Makes come in.

Tagi