1 / 2
Gift Card Box - Print-in-Place Hinge, Snap Lid, No Supports — image 1
1 / 2

Gift Card Box - Print-in-Place Hinge, Snap Lid, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hinged gift card box that prints fully assembled and snaps shut. Ribbon lid with an optional 2-color trick. No supports.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Turn a gift card into a real present. This little hinged box prints in one piece with a working print-in-place hinge, then snaps shut with a soft click. It's also great for cash, tickets, jewelry, or a handwritten note.

Features

  • Fits a standard 85.6 x 54 mm gift card or credit card, even in a sleeve. Inner space is 88.8 x 56.8 x 18.8 mm

  • Pin-free print-in-place hinge: 5 barrel knuckles with cone pins, 0.4 mm clearance, and 45-degree teardrop webs so there's nothing to support

  • The hinge swing was checked from 0 to 180 degrees with no collisions

  • An inner lip with two snap bumps keeps the lid closed, and a pull tab makes it easy to open

  • A ribbon pattern recessed 0.4 mm into the lid

  • Closed size about 96 x 77 x 22 mm, including the hinge and pull tab. It prints open and flat, 96 x 144 mm

Print settings

  • PLA, 0.2 mm layers (first layer 0.2 mm), 2-3 walls, 15% infill, no supports, no brim. Print as oriented

  • Don't over-squish the first layer. If the knuckles are tight, flex the lid back and forth a few times

2-color ribbon trick (any printer)

Add a filament change at the start of layer 3 (Z = 0.4 mm) to gold or silver, then another change back to the box color at layer 4 (Z = 0.6 mm). The ribbon is recessed into the first two layers, so only the ribbon shows the second color. It also leaves a thin pinstripe around the lid edge. Works with M600 or an AMS.

If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.

About the images

All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors are shown for illustration. Real print photos will be added as Makes come in.

Tags