1 / 2
Geometric Christmas Ornaments - Set of 5, No Supports — zdjęcie 1
1 / 2

Geometric Christmas Ornaments - Set of 5, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Five modern geometric tree ornaments: twisted star, spiral rib, onion dome, lattice and faceted gem. No supports.

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Five modern ornaments that print standing up with no supports and look great in silk or matte PLA. Mix the styles for a designer look on the tree, or print a whole set in one color as a gift.

Styles in this set

  • 01a - Twisted Star: a 6-point soft star twisted 150 degrees

  • 01b - Spiral Rib: 16 fine ribs that spiral up the body

  • 01c - Ribbed Onion Dome: a tiered dome with 12 soft ribs

  • 01d - Lattice Wave: a subtle crossing diamond lattice

  • 01e - Faceted Gem: a low-poly, 8-sided gem with sharp facets

Details

  • Each ornament is 47-53 mm across and 79 mm tall, including the hanging loop

  • A flat 6.4 mm base for bed adhesion, and a 45-degree flared cap

  • The hanging loop is printed upright with a teardrop-shaped 4.6 mm hole, so it needs no support. Thread a ribbon, string or ornament hook through it

  • Every surface was checked: no downward face steeper than about 46 degrees from vertical

Print settings

  • PLA or silk PLA, 0.16-0.2 mm layers, 2-3 walls, 10-15% infill, no supports

  • A brim is optional. The base is small, so a 3-5 mm brim helps if your bed adhesion is marginal

  • Roughly 26-35 g of PLA each (an estimate; actual use depends on your walls and infill)

Tip: silk PLA makes the spiral and twist styles shimmer, and matte PLA shows off the facets on the gem.

If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.

About the images

All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors and props (thread, cookies, batteries, keys, rope) are shown for illustration. Real print photos will be added as Makes come in.

Tagi