Geometric Christmas Ornaments - Set of 5, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Five modern geometric tree ornaments: twisted star, spiral rib, onion dome, lattice and faceted gem. No supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Five modern ornaments that print standing up with no supports and look great in silk or matte PLA. Mix the styles for a designer look on the tree, or print a whole set in one color as a gift.
Styles in this set
01a- Twisted Star: a 6-point soft star twisted 150 degrees01b- Spiral Rib: 16 fine ribs that spiral up the body01c- Ribbed Onion Dome: a tiered dome with 12 soft ribs01d- Lattice Wave: a subtle crossing diamond lattice01e- Faceted Gem: a low-poly, 8-sided gem with sharp facets
Details
Each ornament is 47-53 mm across and 79 mm tall, including the hanging loop
A flat 6.4 mm base for bed adhesion, and a 45-degree flared cap
The hanging loop is printed upright with a teardrop-shaped 4.6 mm hole, so it needs no support. Thread a ribbon, string or ornament hook through it
Every surface was checked: no downward face steeper than about 46 degrees from vertical
Print settings
PLA or silk PLA, 0.16-0.2 mm layers, 2-3 walls, 10-15% infill, no supports
A brim is optional. The base is small, so a 3-5 mm brim helps if your bed adhesion is marginal
Roughly 26-35 g of PLA each (an estimate; actual use depends on your walls and infill)
Tip: silk PLA makes the spiral and twist styles shimmer, and matte PLA shows off the facets on the gem.
If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.
About the images
All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors and props (thread, cookies, batteries, keys, rope) are shown for illustration. Real print photos will be added as Makes come in.
