Skadis Box with Sliding Lid - Escher Lizards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The box mounts onto an Ikea Skadis board, and has two lids which slide and rotate in opposite directions.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This box has a sliding lid that transforms without lifting. Simply pull the handle towards you and the lids will swing out of the way allowing you to get to the contents inside. Push the handle back up and the embedded magnets will hold the lids in place. The lid is at an angle for ease of access to the contents.
The lids are decorated with M. C. Escher's lizard design which forms a continuous image across the lids in both open and closed states.
Requires:
2 x 5x2mm circular magnets
2x M3 10mm or 12mm machine screws
Superglue (CA glue) or similar.
Assembly instructions:
Print the parts (box, lids, handle, and pins) from the print profile in the filament of your choice. Glue in the magnets. Attach the handle to the lids. Glue the pins into the box and allow to dry. Mount the lids on the pins one at a time, making sure that when assembled the front edge of the lids is vertical, like the box.