1 / 4
Skadis Box with Sliding Lid - Escher Lizards — image 1
1 / 4

Skadis Box with Sliding Lid - Escher Lizards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The box mounts onto an Ikea Skadis board, and has two lids which slide and rotate in opposite directions.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This box has a sliding lid that transforms without lifting. Simply pull the handle towards you and the lids will swing out of the way allowing you to get to the contents inside. Push the handle back up and the embedded magnets will hold the lids in place. The lid is at an angle for ease of access to the contents.

The lids are decorated with M. C. Escher's lizard design which forms a continuous image across the lids in both open and closed states.

Requires: 

  • 2 x 5x2mm circular magnets

  • 2x M3 10mm or 12mm machine screws

  • Superglue (CA glue) or similar.

Assembly instructions:

Print the parts (box, lids, handle, and pins) from the print profile in the filament of your choice. Glue in the magnets. Attach the handle to the lids. Glue the pins into the box and allow to dry. Mount the lids on the pins one at a time, making sure that when assembled the front edge of the lids is vertical, like the box. 

Tags