Halloween pumpkin candy box - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
hinge box combined with hueforge Image from Pinterest converted to HueForge and connected to the box lid
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
It’s not just a box for sweets.
The box was modeled in Fusion, with a texture subsequently added via the website bumpmesh.com.
but it is also possible to use a plain one without texture
There are two hinge options available: for the first, you need to insert a piece of filament and then melt the ends using a lighter.
The second option requires four M3x40mm screws.
Print Option to box lid:
layer height: 0,10
Swap Instructions:
Start with Black or other color (color of box)
At layer #35 (3.60mm) swap to Black (only if you choose a different box color / If it is black, you can skip this step.)
At layer #40 (4.10mm) swap to Brown
At layer #41 (4.20mm) swap to Orange
At layer #46 (4.70mm) swap to Red
At layer #48 (4.90mm) swap to Yellow
At layer #51 (5.20mm) swap to White
At layer #56 (5.70mm) swap to Black again (box color you choose) and for the rest.