Core One INDX Top Hat TPU Cone Grommet - super thin & flexible, PTFE tube movement not impeded.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Core One INDX Top Hat TPU Cone Grommet - super thin & flexible, PTFE tube movement not impeded.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Top hat grommet / cone for Prusa Core One INDX Top Hat holes.
Super thin 0.4mm & flexible, articulates and does not impede PTFE filament tube.
Printed in 95A TPU.
Ensure supports completely removed.
Super fiddly to install until technique establised (last three of 8 :)), warm grommet cone by kneading between thumb and finger. Push cone through from inside and slightly pull from outside, then push one side of the lip seal through from inside, and rotate from inside until seals are correctly in place both sides.
Support settings used (from Grok - detached well):
Style | Organic |
Top contact Z distance | 0.20 mm |
Bottom contact Z distance | Same as top |
XY separation | 50–75% (or ~0.3–0.4 mm) |
Top interface layers | 2–3 |
Interface pattern | Rectilinear or Concentric |
Interface pattern spacing | 0.2 mm |
Overhang threshold | 45° (or 0 for auto) |
Support on build plate only | On (usually preferred) |
Branch diameter | 2.0–2.5 mm |
Tip diameter | 0.6–0.8 mm |
F3D file included.