1 / 2
3/16" piping walking feet for Consew 206rb, 226, 225 etc, singer 111w, Juki lu-563 562 and more — zdjęcie 1
1 / 2

3/16" piping walking feet for Consew 206rb, 226, 225 etc, singer 111w, Juki lu-563 562 and more

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These piping feet are compatible for all listed machines and many more that use the singer 111w foot system.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

These piping feet are compatible for all listed machines and many more that use the singer 111w foot system. I printed with tough resin on an sla printer. I didn't use my fdm printer as tolerances need to be tight but it will probably work with some finish work. Pictured is an earlier version with less support around the needle hole. I have modified the final model. The support was necessary to stiffen the plastic walking foot.

I drilled and tapped a hole to accept a screw in the tab that clamps the walking foot down. 

I made these in a pinch and they worked surprisingly well. I was able to do a whole job sewing piping onto booths without one breaking. If you want to be able to round corners better you may want to carve out the walking foot a bit toward to back to widen the channel. I used a dremel to do this.

Tagi