3/16" piping walking feet for Consew 206rb, 226, 225 etc, singer 111w, Juki lu-563 562 and more
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These piping feet are compatible for all listed machines and many more that use the singer 111w foot system.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These piping feet are compatible for all listed machines and many more that use the singer 111w foot system. I printed with tough resin on an sla printer. I didn't use my fdm printer as tolerances need to be tight but it will probably work with some finish work. Pictured is an earlier version with less support around the needle hole. I have modified the final model. The support was necessary to stiffen the plastic walking foot.
I drilled and tapped a hole to accept a screw in the tab that clamps the walking foot down.
I made these in a pinch and they worked surprisingly well. I was able to do a whole job sewing piping onto booths without one breaking. If you want to be able to round corners better you may want to carve out the walking foot a bit toward to back to widen the channel. I used a dremel to do this.