Support de tringle à rideau, tout diamètre
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bracket for any curtain rod from 8 to 45 mm. Open (drop-in), closed (slide-through) or end-stop style
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
Replacement or extra bracket for any curtain rod from 8 to 45 mm. Open (drop-in), closed (slide-through) or end-stop style, with the projection you need to clear a frame or radiator.
Lost a bracket, or the rod needs to sit further from the wall? Measure the rod and the distance you need, print a matching bracket.
Customize it:
- rod diameter, rod clearance: your rod in mm plus a little play.
- projection: wall to rod centre.
- style: open (rod drops in from the top, centre brackets), closed (rod slides through), end (closed with a stop, for the ends).
- width, plate height, arm thickness, cup wall: make it beefier for heavy curtains.
- screw diameter, head diameter: countersunk holes for your screws. The upper screw is reached through the cup with a screwdriver.
Print settings: PETG recommended (PLA creeps in a sunny window), 0.2 mm, 4 walls, 40 % infill, no supports. It is exported lying on its side so the layers run along the arm: keep that orientation, it is much stronger.
Check the hold before hanging heavy curtains, and use wall plugs suited to your wall.
---
🇫🇷 Support de tringle imprimé en 3D pour tout diamètre de tringle (8 à 45 mm), ouvert, fermé ou embout, avec l'écart au mur de votre choix.
Designed by Ninji Studio. Parametric OpenSCAD source included.