Herman Miller Jarvis Standing Desk - Stability Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these spacers because my Jarvis desk was wobbly and my monitors bouncy when simply typing on my keyboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently bought a 72” wide Jarvis sit-stand desk from Herman Miller and, to my disappointment, the bamboo top isn’t rigid nor well supported enough. Therefore, my heavy multi-monitor setup kept bouncing around as I was simply typing. My bamboo top was also warping like a banana because of the lack of supports in the center.
I solved these issues by designing these spacers, which are inserted between the central channels and the bamboo top. I’ve used 6 spacers and the desk is now perfectly stable. The bounciness is gone, allowing me to work without being distracted by my monitors jumping around.
I’m attaching two spacer thicknesses: 3.4mm and 3.6mm. I’ve personally used the 3.6mm, but you might need the 3.4mm depending on how tight the screws are between the frame and the top. I recommend making sure the model thickness is suitable for your setup, and scale the model as needed.
I designed the spacers with a protruding tab that facilitates positioning and removal.
Printed in PETG at 100% infill. They need to be printed flat on the bed (not standing upright), because the precision matters on the thickness.