Weekly Pill Organizer - Print-in-Place Lids, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seven-day pill box with print-in-place hinged lids and debossed day labels. Sun-Sat, Mon-Sun, XL and 4-slot daily.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A weekly pill organizer that comes off the bed fully assembled. Each day has its own hinged lid, so you only open the day you need. The day names are debossed into the lid tops and read correctly from the front when the box is closed.
Files
02a: 7-day, Sun to Sat. Closed size 182 x 48 x 26 mm, compartments 19.5 x 34 mm and about 19 mm deep
02b: 7-day, Mon to Sun. Same size as 02a
02c: 7-day XL for supplements and big capsules. Closed size 224 x 58 x 32 mm, compartments 25.5 x 44 mm and about 25 mm deep. Needs a bed of at least 225 x 116 mm
02d: daily 4-slot (AM, NOON, PM, BED). Closed size 120 x 52 x 28 mm, compartments 23.5 x 38 mm
Design
Print-in-place hinges with teardrop knuckles and cone pins. Clearance is 0.4 mm on every moving surface, and the lid swing was checked in CAD from 0 to 180 degrees with no collisions
Every lid has a 45-degree V snap bump that clicks into a groove for the last couple of degrees of closing, plus a pull tab to open it
A raised lip inside each lid keeps small pills from slipping between compartments
Compartments have 45-degree sloped bottoms, so pills slide out easily
No supports. The only horizontal spans are small bridges inside the debossed letters
Print settings
PLA or PETG, 0.2 mm layers, 3 walls, 15% infill, no supports, and no brim (a brim can glue the lids to the base)
Calibrate your first layer and use elephant-foot compensation. The lids sit only 0.4 mm from each other
After printing, open each lid slowly once to break the hinge free
About 39-85 g (estimated)
Please note: this isn't a child-resistant container. Keep medicine out of reach of children. These haven't been print-tested yet.
If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.
About the images
All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors and the pills are shown for illustration, and the lids are shown turned about their real hinge axes. Real print photos will be added as Makes come in.
