1 / 2
Weekly Pill Organizer - Print-in-Place Lids, No Supports — image 1
1 / 2

Weekly Pill Organizer - Print-in-Place Lids, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Seven-day pill box with print-in-place hinged lids and debossed day labels. Sun-Sat, Mon-Sun, XL and 4-slot daily.

Rating
0 / 5
Likes
2
Downloads
18
Makes
0
Views
34
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A weekly pill organizer that comes off the bed fully assembled. Each day has its own hinged lid, so you only open the day you need. The day names are debossed into the lid tops and read correctly from the front when the box is closed.

Files

  • 02a: 7-day, Sun to Sat. Closed size 182 x 48 x 26 mm, compartments 19.5 x 34 mm and about 19 mm deep

  • 02b: 7-day, Mon to Sun. Same size as 02a

  • 02c: 7-day XL for supplements and big capsules. Closed size 224 x 58 x 32 mm, compartments 25.5 x 44 mm and about 25 mm deep. Needs a bed of at least 225 x 116 mm

  • 02d: daily 4-slot (AM, NOON, PM, BED). Closed size 120 x 52 x 28 mm, compartments 23.5 x 38 mm

Design

  • Print-in-place hinges with teardrop knuckles and cone pins. Clearance is 0.4 mm on every moving surface, and the lid swing was checked in CAD from 0 to 180 degrees with no collisions

  • Every lid has a 45-degree V snap bump that clicks into a groove for the last couple of degrees of closing, plus a pull tab to open it

  • A raised lip inside each lid keeps small pills from slipping between compartments

  • Compartments have 45-degree sloped bottoms, so pills slide out easily

  • No supports. The only horizontal spans are small bridges inside the debossed letters

Print settings

  • PLA or PETG, 0.2 mm layers, 3 walls, 15% infill, no supports, and no brim (a brim can glue the lids to the base)

  • Calibrate your first layer and use elephant-foot compensation. The lids sit only 0.4 mm from each other

  • After printing, open each lid slowly once to break the hinge free

  • About 39-85 g (estimated)

Please note: this isn't a child-resistant container. Keep medicine out of reach of children. These haven't been print-tested yet.

If you print one, please post a Make with a photo. It really helps, and I read every comment. Questions or fit issues? Leave a comment and I'll take a look.

About the images

All images are computer renders made from the exact STL files in this listing, not photos of a print. Colors and the pills are shown for illustration, and the lids are shown turned about their real hinge axes. Real print photos will be added as Makes come in.

Tags