Macbook Pro Stands With Mousepad Thickness Compensation ( 14” and 16” | 2021 - Present )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These stands allow a Macbook Pro to be lifted off just a bit at an angle, and optionally adapt to a mousepad.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I had two issues with my 14 and 16 inch Macbook Pros: I wanted to lift them off the desk for better heat dissipation, and I needed them to lay flat on an uneven surface caused by my extra-large Logitech mouse pad.
This design is very stable. The (2) stands support a Macbook Pro through the computer’s own four rubber feet.
To accomodate a mousepad, I designed TPU 95A feet in two thicknesses. They need to be pressed into the stands, so printing them in a solid material such as PLA or PETG won’t work (unless you cut off the tips and glue the feet in place!)
If you like the stands and don’t need height compensation, print them with or without 4 feet of the same height. If 1-3 corners of your Macbook Pro need height compensation for a mousepad like me, you’ll need to print a few thick and a few thin feet.
The legs were printed in Prusament PETG Galaxy Black, and the feet were printed in TPU 95A. Do not use supports as to not clog the holes for the feet.