3D Printing Tool Holder for IKEA SKÅDIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds cutters, scraper, hex keys, spare nozzles and a deburring tool on an IKEA SKÅDIS. One piece, no supports.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Want to sell prints of this model? A commercial license is available on my Patreon:
https://www.patreon.com/Elizabeth3D
Like my free models? Support me on Ko-fi:
One rack for the tools you reach for next to the printer. It hangs on an IKEA SKÅDIS pegboard and prints in one piece, upside down, with no supports.
What it holds
- Flush cutters, jaws down: 28 x 14.5 mm slot
- Scraper or spatula: 68 x 11 mm slot
- Hex keys 1.5, 2, 2.5, 3 and 4 mm, with the sizes engraved on the front
- 6 spare M6 nozzles
- A hex-handle deburring tool (12.7 mm across flats) and 3 spare blades
- Tweezers: 36 x 6 mm slot
- A nozzle wrench or small spanner: 19.6 x 8.1 mm slot
- Pens, needle files or the nozzle cleaning needles: two 8 mm holes and one 7.5 mm hole
- A marker or glue pen: 15.5 mm hole
Every size is listed here so you can check your own tools before printing. The STEP file is included if you want to change a slot.
How it hangs
Two hangers go through two slots of the same row of the SKÅDIS (80 mm apart). Push them in and let the rack drop: it sits flat against the board and does not wiggle.
Print settings
- PLA or PETG, 0.2 mm layers, 3 walls, 20% infill
- No supports: print it as it is oriented in the file, top face down. The hangers start on the bed and the bottoms of the holes are short bridges.
- Every hole has a 0.6 mm chamfer at the top, so the first layer does not close them and the tools drop in easily.