Proto plate for Adafruit STEMMA QT and Feather boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your STEMMA QT and Feather boards something to hold onto while you're prototyping.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
My prototyping boards were in need of some order. This is what I came up with.
It uses M2.5 screws and nuts and has spacing for 20mm and 12.5mm, with 7.5mm gaps between the boards. I couldn't find the exact hole spacing online for the boards, but found this worked well so that the boards could be evenly spaced.
The Feather board had nothing in common with the STEMMA QT hole spacing, so I made an adapter plate for it.
I also made a knob test jig for the AS5600. It uses a 1/4" x 1/8" diametric magnet. Note that the AS5600 needs a diametrically magnetized magnet to work like this. I found mine at https://www.kjmagnetics.com/d42dia-neodymium-diametric-disc-magnet
The M2.5 screw kit I used is https://www.amazon.com/dp/B0DPX1X3P1