1 / 4
Proto plate for Adafruit STEMMA QT and Feather boards — image 1
1 / 4

Proto plate for Adafruit STEMMA QT and Feather boards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Give your STEMMA QT and Feather boards something to hold onto while you're prototyping.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

My prototyping boards were in need of some order. This is what I came up with.

It uses M2.5 screws and nuts and has spacing for 20mm and 12.5mm, with 7.5mm gaps between the boards. I couldn't find the exact hole spacing online for the boards, but found this worked well so that the boards could be evenly spaced.

The Feather board had nothing in common with the STEMMA QT hole spacing, so I made an adapter plate for it.

I also made a knob test jig for the AS5600. It uses a 1/4" x 1/8" diametric magnet.  Note that the AS5600 needs a diametrically magnetized magnet to work like this. I found mine at https://www.kjmagnetics.com/d42dia-neodymium-diametric-disc-magnet

The M2.5 screw kit I used is https://www.amazon.com/dp/B0DPX1X3P1

Tags