Breakable Pots for Zelda Ocarina of Time 40th Anniversary
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unofficial breakable pots to celebrate the 40th Anniversary of the Nintendo's Zelda video games.
- Ocena
- 5 / 5
- Polubienia
- 285
- Pobrania
- 252
- Wydruki
- 1
- Wyświetlenia
- 2740
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've created a handful of breakable pot designs:
Two (simple and patterned) versions inspired by pot designs in The Legend of Zelda: Ocarina of Time for Nintendo Switch 2
One (retro) version inspired by the pot design in The Legend of Zelda: Ocarina of Time for Nintendo 64.
One (honey drip) version inspired by the pot design in The Legend of Zelda: Echoes of Wisdom for Nintendo Switch.
Two (blue wave and ornate pattern) versions inspired by the pot designs in The Legend of Zelda: Wind Waker for Nintendo GameCube.
Just like the game, break apart the (magnetically attached) pot to reveal rupees!
Use with my related Rupee with or without Magnets model:
Parts
Each pot uses 40 6x2mm magnets
The magnets that I used were purchased from https://a.co/d/04ZLyCPx on the US Amazon store
After cleaning out the magnet holes with a small flathead screwdriver, add one small drop of CA / super glue per magnet (ensure the nearby parts have compatible polarity—double check before gluing
Breakable Pots
Use the part orientations in the provided 3mf files for highest chance of success.
This can be a tricky print because PETG doesn't bond to PLA but that's part of the intention so the supports just slide right off. If the PETG interface layers don't rest well on the PLA supports, you might get some rough surfaces so I recommend printing the pot fragments one at a time.
Printer: Multi-tool printer like the Prusa Core ONE+ Gen 2 with INDX
Rafts: No
Supports:
Generate support material: Yes
Auto generated supports: Yes (the 3mf files have support blockers where appropriate)
Overhang threshold: 55°
Top contact Z distance: 0mm (soluble)
Pattern spacing: 3mm
Top interface layers: 5 layers
Interface pattern spacing: 0mm
Support on build plate only: On (use the part orientations in my 3mf files)
Multiple Extruders (so you can use a smooth PEI sheet without risking PETG touching the sheet and maximizing the support structure since PLA and PETG do not adhere well):
Support material/raft/skirt extruder: one of your PLA tools
Support material/raft interface extruder: PETG tool
Resolution: 10% Gyroid
Colors
Filament for the Simple Pot (requires 3 tools)
1 = PLA Inland Light Brown
2 = PLA Prusament Blood Red
3 = PETG Prusament Urban Gray (or any color)
Filament for the Patterned Pot (requires 4 tools)
1 = PLA Inland Light Brown
2 = PLA Polymaker PolyLite Green
3 = PLA Prusament Blood Red
4 = PETG Prusament Urban Gray (or any color)
Filament for the Retro Pot (requires 4 tools)
1 = PLA Polymaker PolyTerra Army Brown
2 = PLA Prusament Vanilla White
3 = PLA Inland Brown
4 = PETG Prusament Urban Gray (or any color)
Filament for the Honey Drip Pot (requires 3 tools)
1 = PLA Polymaker PolyLite Yellow (but needs something more opaque)
2 = PLA Prusament Pineapple Yellow
3 = PETG Prusament Urban Gray (or any color)
Filament for the Blue Wave Pot (requires 4 tools)
1 = PLA Overture Digital Blue
2 = PLA Prusament Gentleman's Gray
3 = PLA Prusament Pristine White
4 = PETG Prusament Urban Gray (or any color)
Filament for the Ornate Pot (requires 6 tools)
1 = PLA PolyMaker PolyTerra Lavender Purple
2 = PLA Prusament Galaxy Purple
3 = PLA Prusament Vanilla White
4 = PLA PolyMaker PolyLite Teal
5 = PLA PolyMaker PolyTerra Forest Green
6 = PETG Prusament Urban Gray (or any color)
These models are not affiliated, associated, authorized, endorsed by, nor in any way officially connected with Nintendo. Their names, related names, marks, emblems, and images are registered trademarks of their respective owners.