1 / 7
Nordelettronica NE333 Display - Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Cover for the Nordelettronica NE333 Display
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've created this "push on" display cover for the Nordelettronica NE333 because the green LED lights are way to bright during the night.
You just need to print the two pieces, put everything together and push the cover over the existing frame.
When its closed it holds on with two magnets (D: 6.05mm ; H: 2.02mm), for the hinge, you can use a pice of filament.
Please check your dimenson before printing.
I used:
Anycubic PETG
15% Infill
3 Walls
Tree Supports -Slim