Castle Paint Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a fun paint caddy for my 1/2 oz paints. I couldn't find one I liked, so I made this.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 535
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I was looking for a fun paint caddy for my 1/2 oz paints. I couldn't find one I liked, so I made this. It should hold 15, 1/2 oz, bottles of paint.
Dimensions are 164mm x 141mm x 105mm. The part will fit comfortably on an Ender 3 and a Prusa i3 Mk3S.
I made this in Fusion 360 and have supplied SketchUp files along with the Fusion 360 files.
I am not sure how well the file with the stonework will print as I was not able to find a way to chamfer the edges of all of the stones. I may have to learn blender and make new stones and re-texture the piece. Or if one of you has the skills, it could be a fun remix.
G-Code
I used the standard Prusa .20mm QUALITY MK3 profile with the following modifications:
- Infill set to 5%
- Infill changed to grid
- Material set to Generic PLA
Print instructions
It seems that Cura has an experimental feature called Make Overhangs Printable. This will taper up the bottom of the wall stones. I think this may help this print better. I have not had enough time exploring the Prusa Slicer to find a similar feature yet.