Caliper Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a universal, screwless and rugged caliper box, which should fit most of commonly used calipers.
- Ocena
- 0 / 5
- Polubienia
- 103
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 1780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a universal, screwless caliper box, which should fit a lot of commonly used calipers.
The TPU seal (which is made out of raw TPU filament) is optional, but it will improve the the tightness of the clamping mechanism.
Special printsettings:
The TPU parts should be extra soft, make sure to set the following settings or use my printprofile:
Perimeters: 1
Top & bottom layer: 2
Infill type: Gyroid
Infill: 5%
Customization:
I have provided the Fusion 360 file for customization.
Instructions and assembly guide:
It's pretty straight forward, just use raw filament and push it into the provided hinge holdes.
For the latch install the wheels also with raw filament. After that, attache the latch to the lid with raw filament.
Now you can use TPU filament for the seal, you don't need to print something, just raw filament again which you can cut to size.
That's it!
The base for this box design is provided through my previous box design “The Allround Box”