Liczymy pasujące modele…
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).
Wydruk około 16,13 €–19,72 € nettoWstępna wycena jednego wariantu
Helps you stack two or more IKEA LACK tables on each other without screws. Print instructions This is a IKEA LACK table mount for stacking two (or more) tables on top of each other, without screws. Feel free to remix this, but please…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
A wall mount that uses large size velcro command strips instead of of screws. Based on the math I have done, only half a strip on each side is necessary for a standard record, but I recommend using one full strip just in case. This also…
Summary A very simply remix of a remix by N8finch of a Jenga case that eliminates the need for M3 hardware.
The Orange Pi PC isn't so popular, so there are a few options for snap-fit or screwless cases. With this, I made one myself. A 4010 fan can be installed inside the case through snap-fit as well. Printing Suggestions: Print the bottom part…
Gehäuse für ein Pine64. Das Gehäuse kommt komplett ohne Schrauben aus, und wird einfach zusammengesteckt. Der Deckel wird per Klip gehalten und kann durch leichtes anheben der Klammen an den Rastnasen wieder geöffnet werden. Am Boden…
A wall mount that uses large size Velcro command strips instead of of screws. To make a custum text open the Blank Base file in Fusion 360 and create a sketch and center the text to the model then extrude or cut the ends to be flush. NOW…
This is probably the simplest spool holder you'll find here. Just print it and use it, no screws needed for assembly. I designed it to be mounted on a 2020 aluminum extrusion profile. You just need to print it and snap it wherever you…
I designed a small wall mount for most common types of shavers. The part is mounted with double sided adhesive. I used one from 3M with 1.4mm thickness. On the backside there is a pocket with 0,3mm depth for positioning of the adhesive.…
Made this so I could hang a flag where I couldn't easily use screws. Made the back surface pretty big so that it could fit enough double sided tape to support the weight of a somewhat heavy flag. Parameters (width, height, hook length and…
The lid compresses onto the edges of the PCB, holding the Pi safely in place. Two sliding clips hold the lid in place. The case comes with openings for all ports and the top can be modified to expose the GPIO. Should fit most models…
Front and back grills, and endcap have been modified, so it now allows inserting 6x3mm disc magnets. Thanks to use of magnets, you no longer need screws to mount endcaps, which improves look of the printer. Endcaps are also easy to…
Print and assemble… Print in PETG if you want the “tabs” to not break as easily… :) I did som smaller PCB-Mods on my variant, but the box should fit still for this controller: https://github.com/Hasenpups/WLED_ESP32_Controller
A Simple Arduino Nano GRBL Sheild Extrusion Mount, Thats Screwless, Do Not Sell / Use Commercialy
This print lets you mount your Ring Battery Doorbell Pro 2nd Gen to your door without screwing directly into your door. It also has a neat little (mostly decorative) roof to deflect rain. You will need to use the backplate and the small…
E N G L I S H Suitable for: Artillery Sidewinder X3 Pro/Plus and X4 Pro/Plus. Features: no screws no glue no tools modular very many viewing angles universal fit holes for cable ties Foldable Print out of PETG, clip on and plug together…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
This screen mount is designed for the Elegoo Neptune 3 and 4 series. It attaches securely to the side of the printer without any screws, providing a hassle-free installation. Two versions are available: the lower model and the upper…
Rokenbok Conveyor Battery Doors (Screw and Screwless Versions) I recently got a couple conveyors that were missing the battery doors so I decided to make some replacements. Keep in mind that there are two versions of the battery operated…
Front and back grills, and endcap have been modified, so it now allows inserting 6x3mm disc magnets. Thanks to use of magnets, you no longer need screws to mount endcaps, which improves look of the printer. Endcaps are also easy to…
I printed this in PETG. Normal Prusa Generic settings. It's held up well so far.
A scraper without screws or supports... specially designed for 19 x 61 mm blades with four-holes - as shown in the picture -... There are two arm files... the first is quick and easy... and the second is more durable for heavy-duty…
Connect the cam to the cable! Put the Camera onto the frame. Push the frame with the camera into the arm. Close the lid.
A simple holder for your daylight on a stick LED strips to mount on a 3030 aluminium extrusion. When using in an enclosure it should be printed in a temperature resistant material such as ABS or ASA. Currently mounted in RatRig Vcore 4.
Organize your kitchen with ease! This is a practical and sturdy holder designed to mount your kitchen rolls directly onto furniture, shelves, or under cabinets. Whether it's aluminum foil, plastic wrap (cling film), or baking paper ,…
ArmXRP Alpha is a fully 3D-printed, screwless robotic arm designed around the SparkFun XRP robotics ecosystem. Built with the SnapBolt-HexClip assembly system, ArmXRP can be assembled without screws, fasteners, or tools, making it an…
A model for some replacement nozzle guides for those who have stripped the threaded holes on their bolt. (like me) Just print up-ended like in the screenshot below or in the provided Gcode, with the spikes facing up and a small amount of…
Supports Recommended (Organic or Grid) 0.1-0.15 Layer Height
Summary A very simply remix of a remix by N8finch of a Jenga case that eliminates the need for M3 hardware.
This is a lightweight stand for most Pi-3 compatible boards, it does not require any other hardware and it just attaches with friction, its not a very secure fit but it should not detach under normal use, but you can also "plastic weld"…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
A simple clip-on airtag holder. Designed for this seat: https://www.selleroyal.com/en_de/vivo.html The airtag will be encased in the print to protect it from moisture. Simply add a print pause to place the airtag into the cavity. There…
An easy to print screwless Tool box designed after the Anycubic Kobra/Vyper LCD casing. Has Snap on Hinges and locking latch. Also an inbuilt shape that allow to stack several of them in position. It was designed to be printed vertically…
Hard to turn. Used better and stronger mechanism at this time. Category: Puzzles
A parametric version of a decora/leviton style screwless face plate for light switches. Can be configured for 1 to 6 gangs in width. Each cover is made in 2 pieces. A base plate that is screwed into the switches which provides both…
What is this? This is a simple multi-part design to hold a power adapter of various sizes under the desk. This design is meant to use with adhesive tape, though you could easily remix to add screw holes if you'd rather that. I use these…
I ran out of fan screws and noticed that the PLA+ filament that I used far strong enough that screws aren't needed. I made a project using 8 fans. after quickly running out of screws I made these screwless connectors. They are a very…
It's a must to print rails with some support, make sure to clean it out real well before putting the stop-inserts. Also recommended to add modifiers to enforce enforce the hook part with 100% infill. I printed in [email protected] Update Created a…
Custom mount to install under the Bambu AMS system, specifically crafted to hold an IKEA Skadis pegboard without the need for screws. The mount includes notches that securely slide into the bottom of the AMS system, creating a stable…
Testet Material PLA.
Simple case for the Innomaker USB2CAN CAN-bus to USB adapter. It does not require any additional fasteners
Simple case for 9-pin D-SUB connectors. No additional fasteners are needed. The housing is symmetrical, so you just need two identical prints to make one housing.
I recently moved into an apartment with concrete walls and did not want to drill holes to mount my HUGAD curtains. I made a mount that clips into the end of the rods to use command strips instead. One clip is for the smaller diameter rod…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
No support needed Rev.02 - screwless version battery connecting boxes check on: https://www.printables.com/model/1092923-18650-battery-connecting-box
I needed a power strip hook and I did not wanted to drill the desk, then I designed on catia. Desk thickness is 30 mm. I used petg and my profile is attached also, I tried so much, I advise. Edit: Anyone need pls send me mail, I can send…
Ever since I introduced the original Noctua Fan mount for the Gamecube back in 2020, I wanted to revisit it to see if it could be improved upon. One thing I never liked was the ugly external fan screws that mount the Noctua fan to the…
A fully modular stacking system designed for both Radxa ROCK 4 and Raspberry Pi. The stack features a secure, screwless design with mounting pillars that hold the boards in place. The press-fit feet are printed separately to minimize…
A variation on @ukwebb's Dry Box grommet. I wanted something smaller than their design, and was not planning on using a PTFE tube, but rather allowing the 1.75mm filament to pass directly through a 2mm hole. Scaled down approx. 40% An…
Free 3.5" HDD protection enclosure - screwless! Simple, tool-less, screw-less enclosure to protect your old HDD. I had fun designing this protection frame, as well enclosure, to be easy to print, easy to assemble and practical. It even…
An alternative wall hanger for paintings that don't need screws. Use strong mounting tape instead. Can hold medium-sized paintings metal frames. Be careful to check that the paint on the wall is also strong enough to support it. Printing…
Who likes threading screws into plastic, or hunting for some odd metric screws? This case is in 2 halves , plus an ornamental top plate, held together by rectangular snap on bands (green) on each end.
Replaces the 5015 blower fan cover screws with pressure fit tabs.
Make your 3D print projects great again - Here is a collection of common screwless joints you can use in your project. Feel free to edit these on my Tinkercad . PRINT SETTTINGS 0.2~0.24mm layer height 0.4mm layer width Supports required…
Caramelo Designs' "FIDGET LIGHTER!!!" but without the annoying screws.
HP Prodesk Mini, Elitedesk Mini, Elite Mini, Pro Mini 400 600 800 405 705 805 2.5 inch SSD HDD toolless Screwless Rails for Caddy No need for screws, locks the SSD/HDD into place in the Caddy. This is for the SSD Or HDD, not for the NVME…
E N G L I S H Suitable for: Artillery Sidewinder X3 Pro/Plus and X4 Pro/Plus. Features: no screws no glue no tools modular very many viewing angles universal fit holes for cable ties Foldable Print out of PETG, clip on and plug together…
Raspberry Pi Zero and Pi Zero 2 Case - Version 2 This is an improved version of the case that I designed ten years ago. This version has improved HDMI connector slot, permitting more types of HDMI connectors to be compatible with the…
This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…
My remix of the ‘Screwless pc fan combining connector’ from Makerworld created by Tim. I changed the size between the pins to fit on smaller fans. I used it specifically for the ‘Arctic P8 PWM PST’. One variant with 10 mm and another with…
The rest of the parts from the original design are untouched. to assemble the strain relief itself you push it against the mount with the large holes aligned with the pins. once the strain relief is flush against the mount surface push it…
These caddies haven't been tested in servers of the 14th gen of dell servers nor other brands, if you print one and you find it compatible please share with us.
Adapter tested on dell gen 11/12/13th gen systems, haven't tested it in other systems, feel free to test it and share with us. The caddy for 2.5" dont need screws, the part that goes into a 3.5" caddy needs, or either use a 3.5" screwless…
The 8032-SK model of the classic Commodore CBM PET lineup does not feature the iconic “hood stand” that holds the case open for easy access. With these parts, you can retrofit a similar stand that securely holds the case open between the…
Snaps on and off mixershaft easily and stores 2 Bamix tools. Store the 3rd one on the mixer itself. Thanks to @WoutDR for the original model!
Screwless 15 degree stand for the Philips hue play light. Snap or slide it in. Feedback is much appreciated!
Print in PLA on anycubic kobra 2 neo. Infill :- 15% (you can do 100% for strength) no supports
Elements with 2 or 3 hooks mountable to Billy shelves without screws or any tools. Usable for hanging jackets. it uses the slight overhang of the side pieces on the top for stability. The design has sufficient space for two sided tape for…
Comfort straps inspired by @CapraAudio design. The screw-in version can be installed the same way as other MrSpeakers-style straps. I recommend finding longer screws as the stock ones will barely reach the threads on the adjustment arm.…
Just a coloured remix of PiZero Vertical Screwless Camera Housings by gowen with PRUSA logo for MMU. Print instructions Category: Camera
It's a little bigger and blank, and the side is completely covered by the fascia. Sorry I don't have any real pictures of it, but you can get an idea of what it looks like from the original.
As other models cracked when I screwed them on my Logitech C270, I decided to create a mount that just snaps on the camera without using any screws. The design still provides a tight grip on the webcam.
My version of the CYD: https://www.aliexpress.us/item/3256806436471011.html Not All CYDs are the same. This one has the big LED and photoresistor on the front (I block the photoresistor in this model as I have no need for it), USB-C, rtc…
Caramelo Designs' "FIDGET LIGHTER!!!" but without the annoying screws and this version does not require magnets.
Description: This is a custom-designed enclosure for the SW3518 module , available in two wall thickness options : 2mm for added durability and 1.6mm for faster printing and lighter applications. Key Features: Screwless, Sealed Design :…
Kit de mala e tenda para Silakka54 Este kit é compatível exclusivamente com o estojo sem parafusos Slim Silakka54: https://www.printables.com/model/1248872-slim-silakka54-screwless-case Ele fornece um sistema de suporte ajustável para…
Hook for Ikea Muskan shelf, was needed to hang backpacks. Mounted with Cable ties. Printed in PETG for long-time stability, use higher perimeter count (i used 5) and print laying on its sides with support for maximum weight capacity. I…
Made these footpads as a replacement for the injection molded ones that come with the frame. These use no screws and just press in place, allowing for shorter screws to be used to fasten the motors. Needs to be printed in TPU. They are…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Switch 2 Dock Wall Mount (Screw-less) 4 Month Update: No sign of failure or other issues with regular use thus far. A wall mount designed to work with the Nintendo Switch 2 dock, uses Command Strips (or similar) for hanging. Stand-offs…
Custom dash kit to install a Sony XAV-AX3250 in a MK4 volkswagen Jetta (mine is from 2004, but I believe it should fit all MK4 Jettas, and potentially other VWs from the era). Is a toolless and screwless install. When printed face down…
Simple Hanger and Cover for a eu adaptor to e27 lamps to stick to a wall
Here is some organic decoration for the holder. I made two forms to avoid monotony. No glue is needed, just snap them in
The extruder clip that was included in FedorSosnin's thing wouldn't fit my stock extruder because the screw for the spring was in the way. This clips onto the edge and doesn't require any screws. Print Settings Printer Brand: Creality…
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
While renting a place with no doorbell wiring this worked well by using a tight fit with the vinyl and vinyl flashing.
This screen mount is designed for the Elegoo Neptune 3 and 4 series. It attaches securely to the side of the printer without any screws, providing a hassle-free installation. Two versions are available: the lower model and the upper…
This is a stupid body in order to use screwless body of dualshock4 controller of another project
i couldn't find any hooks for vertical acoustic panels, so i created my own. It’s screwless, put it in and twist not much to say, i printed with base plate on bed with a little support for the hook
This is a remixed version of Paul Poley's excellent Screwless Wall Plate model that has been remade and extended to allow switches to be installed into shallow switch boxes like you'd find in old houses. The model comes in two depths,…
This Raspberry Pi spacer is designed to elevate your board safely within enclosures or custom setups. Printed with PETG V0 , a flame-retardant material certified for electronics , it provides excellent strength, durability, and heat…
Update 2026-03-18 Added a 67mm high case that can accommodate taller keycaps, such as these: This is built around the excellent screwless case and tenting platform , and provides a carry case with a slot to hold the cable. Use a rubber…
If you want to mount your Pico Remote just like a standard wall switch, especially alongside a standard wall switch, this is NOT the model you're looking for. If you're putting your Pico Remote someplace else and want it to have the look…
This is yet another remix of the original silakka54 case, which works great already for the AliExpress kit, with some added features (some of which already exist in other remixes as well, but are kinda brought together in this one):…
