Screwless fan connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of the 'Screwless pc fan combining connector'. One variant with 10 mm and another with 9 mm between the pins.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
My remix of the ‘Screwless pc fan combining connector’ from Makerworld created by Tim.
I changed the size between the pins to fit on smaller fans. I used it specifically for the ‘Arctic P8 PWM PST’. One variant with 10 mm and another with 9 mm between the pins has been added.
"Print Settings
Printer:
Bambu lab P1S
Rafts:
Yes
Supports:
No
Resolution:
0.20
Infill:
15%
Notes:
For maximum strength: Print with the flat side of the pins down! Else the pin will break."
This has been used for a project that adds fans to radiators. This entire project can be found here. https://vpee.nl/3d-files-radiator-fans/