1 / 14
Screwless Case PINE64 PA642GB (Schraubenloses Gehäuse ) — zdjęcie 1
1 / 14

Screwless Case PINE64 PA642GB (Schraubenloses Gehäuse )

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Schraubenloses Gehäuse für Pine64

Ocena
5 / 5
Polubienia
4
Pobrania
76
Wydruki
2
Wyświetlenia
600
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Gehäuse für ein Pine64. Das Gehäuse kommt komplett ohne Schrauben aus, und
wird einfach zusammengesteckt. Der Deckel wird per Klip gehalten und kann durch leichtes anheben der Klammen an den Rastnasen wieder geöffnet werden.
Am Boden befindet sich ein Schraubenkreuz zur Wandbefestigung.

Housing for a Pine64. The case comes completely without screws, and
is simply put together. The lid is held by a clip and can be opened again by slightly lifting the clips on the latches.
At the bottom is a screw cross for wall mounting.

Tagi