Squeeze fan - New waterproof fan!(screwless)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable,…
- Ocena
- 3,333 / 5
- Polubienia
- 476
- Pobrania
- 4401
- Wydruki
- 36
- Wyświetlenia
- 23 197
- Oceny
- 30
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a waterproof squeeze fan.
It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy.
You only need a hammer!
+Jul 06,2021
The turbine have been updated to have more power.
+Jul 11,2021
Added pin_tight in response to comments that pins are too loose.
The hole error of the base and cover has been adjusted.
+Jul 12,2021
Updated turbine and gear9(shaft) to better lock
+Jul 18,2021
Uploaded a thin turbine to easier to turn though the turbine has a similar force.
+Jul 18,2021
The turbine has been updated and parts have changed slightly.
Past versions have been removed.
This model accepts a 0.6mm diameter error.
Print out using 0.4 or 0.5mm nozzles.
PLA doesn't matter, but PETG is better (because it's quieter and more durable).
Inspired by Zippitybamba's fan design, I designed this fan: https://www.thingiverse.com/thing:3087416
Assembly video:
Fan demo!
Category: Mechanical Toys