Thin Lutron Caseta Pico Remote holder for use with Wyza's screwless switch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thinnest possible base to have Pico Remote flush with Wyza's screwless switch cover.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
If you want to mount your Pico Remote just like a standard wall switch, especially alongside a standard wall switch, this is NOT the model you're looking for.
If you're putting your Pico Remote someplace else and want it to have the look of a standard switch with a plate around it and potentially mount it to something, but with as little thickness as possible, this will do it. It's designed to use these faceplates, with front border of the remote close to flush with the front of the plate. The screw holes are designed for M3 screws, centered side-to-side, and spaced 84mm center-to-center to make it easy to mount to openGrid with these snaps.