Silakka54 Screwless and Tenting Platform carry case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple carry case to hold a silakka54 that's using the screwless case and the tenting platform.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1020
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
Update 2026-03-18
Added a 67mm high case that can accommodate taller keycaps, such as these:
This is built around the excellent screwless case and tenting platform, and provides a carry case with a slot to hold the cable.
Use a rubber band to hold the case closed, since it's set to be a bit loose when assembled (to make it easier to remove the keyboard).
It also works without the tenting platform as in the picture.
I'm using low profile keycaps, but i did a height test with some cherry keys and it seems to work fine. Let me know if there are issues.
Print at 15% infill, 2 walls. I printed mine at 0.32mm height for speed, but it should work just fine with the usual 0.2mm height.
Print with supports as pictured, with a blocker to disable support for the cord holder since it will be mostly fine with bridging. You can also allow support there if you want cleaner internal ceiling in that section.