Wyniki wyszukiwania: silakka

Silakka54 Case Tenting Platform

Simple tenting platform for Silakka54 keyboard with case . 5deg, 10deg, 15deg, 20deg, 25deg

Silakka54 Case

The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…

Slim Silakka54 screwless case

This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…

Silakka54 Tenting Platform

Simple tenting platform for Silakka54 keyboard. Works without or with bottom plate.

Slim Silakka54 screwless case for Aliexpress keyboards

The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…

Silakka54 Tent & Tilt Ergonomic Kit (for Slim Screwless Case)

Kit de mala e tenda para Silakka54 Este kit é compatível exclusivamente com o estojo sem parafusos Slim Silakka54: https://www.printables.com/model/1248872-slim-silakka54-screwless-case Ele fornece um sistema de suporte ajustável para…

Slim Silakka54 tenting case with fully enclosed electronics

A fully enclosed tenting case for Silakka54 split keyboard. Fit nicely around the USB port and the jack connector, has slim edges. Keyboard is press fitted and the electronics cover is screwed from the bottom. Left side file provided,…

Silakka54 Keyboard Case - With Less Screws* AliExpress PCB Compatible

Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…

Silakka54 Slim Case Yet Another Remix

😁 Please post your makes! ❤ Yet another remix of Squalius' excellent slim case for this wonderful keyboard! 🚀 This is for the Aliexpress V1.3 PCBS, but it might work on other variants. Will add pics tomorrow. BOM Same as original: 12x…

Silakka54 Slim Case V1.3 Aliexpress PCB

🚩⚠ I recommend my design here instead: Notes Remixed to accommodate V1.3 Aliexpress PCBs. The rest of this design has not been altered in any way.

MX Keycaps (standard, tilted, tilted-lifted) silakka54

Basic Versions I use on my Silakka54, modifications possible by Onshape ( LINK ) Update: 04.09.25 Added a tilted-corner and a tilted-corner-lifted

Silakka54 - Split keyboard

Silakka54 is a RP2040 Zero based 54-key column staggered split keyboard. PCB uses hotswap sockets. Design is inspired from REVIUNG41 and Corne keyboards. PCB is designed for MX style key switches. Current top plate only supports MX style…

Silakka54 Slim Case

The case should be compatible with the original silakka54 and the wired SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heat set inserts goes into the base. If you want to adjust the angle of the keyboard, you…

Silakka54 Case and Controller Cover

These models provide a one-piece case and a controller cover for the Silakka54 split keyboard in its unofficial AliExpress v1.3 edition. The version number is printed on the PCB under the controller. The v1.3 has soldered spacers, unlike…

Silakka54 tenting platform aliexpress edition 5 degree

LH side only. To make the other one simply mirror it in your slicer

Silakka54 Raised Case Cover

The cover was too short for the aliexpress Silakka I bought, so I modified it to give me the clearance I needed.

Diagnal Tenting Base for Silakka54

This is a 10 degree diagnally tenting base for Silakka54. I feel the diagnal direction is much more natural for me. It direcly snaps onto the original base. No other tools needed.

Silakka54 Tenting Platform (Aliexpress) - 25 Deg

Remix of 25deg stl for aliexpress version of the PCB. Keeping the file only for left split. Mirror model in slicer.

Remix Flat Top 4mm stems - MX Keycaps (standard, tilted, tilted-lifted) silakka54

Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…

Silakka 54 case slim

Silakka54 carcasa para la versión de 3 placas de aliexpress. Se basa en otra carcasa que había de tornillos, en este caso se reduce el tamaño a su mínimo posible, y se cierra completamente los chips. El izquierdo tiene el tamaño idóneo…

Silakka54 full top frame

MX Keycap tilted - silakka54 - remixed

Curved surfaces removed from keycap tops

Silakka54 Screwless and Tenting Platform carry case

Update 2026-03-18 Added a 67mm high case that can accommodate taller keycaps, such as these: This is built around the excellent screwless case and tenting platform , and provides a carry case with a slot to hold the cable. Use a rubber…

Silakka54 PCB Spacer Plate

With this spacer plate, your top plate (that you attach the switches to) does not float. Important The final height of this part should be 3.3 mm . I got to this figure by measuring the gap between the PCB and the switch plate after I…

Silakka54 Wireless case

Different controllers on the PandaKB Silakka version got me to find a model, and I really liked the friction fit method. Remixed this to make a version that would fit the keyboard, and a 503450 battery under it as well. It is a basic…

silakka54-20ish-aliexpress

Used the spin feature in blender eyeballed it, came out at a little over 20 degrees.

Silakka54 Carry Case

Notes Securely holds the two halves together. Friction fit sliding top. No room for cables I want to mention that if you have rubber feet attached to your keyboard, this carry case will not work for you. I will rectify this shortly. Works…

Silakka54 Split Keyboard MCU Cover Plate

Compatible with PandaKB Silakka54 Wired Split Keyboard (QMK/VIAL & Tenting) – Magnetically secured with m4*3 magnets.

Silakka 54 Split Keyboard Custom Lego Case

A custom case and cover for the silakka split ergo keyboard, designed to allow the attachment of LEGO pieces

Silakka54 Tenting Platform (Aliexpress) - 10 Deg

Remix of 10deg stl for aliexpress version of the PCB. Keeping the file only for left split. Mirror model in slicer.

Silakka54 Slim Case Yet Another Remix - Travel Case

This case allows easy transport and protection of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator (thanks for that awesome design). This case will snap together using 7x2.7mm magnets (x8) (I think this is…

Silakka54 wireless case - push fit

I designed this for use with Star Citizen and other games where there is a combination of flying and walking on foot or using land vehicles. I like my joystick centered which leaves nowhere for the keyboard. I use a Virpil WarBRD so it's…

Silakka54 Case

The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…

Silakka54 full top frame

Slim Silakka54 screwless case for Aliexpress keyboards

The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…

Silakka54 Keyboard Case - With Less Screws* AliExpress PCB Compatible

Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…

Silakka54 Slim Case

The case should be compatible with the original silakka54 and the wired SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heat set inserts goes into the base. If you want to adjust the angle of the keyboard, you…

Remix Flat Top 4mm stems - MX Keycaps (standard, tilted, tilted-lifted) silakka54

Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…

Silakka54 Minimal yet Complete Case

This is a living project, meaning, I make improvements all the time. You will have access to all iterations of the case. * This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! ** This case…

Silakka54 Slim Case Yet Another Remix - Travel Case

This case allows easy transport and protection of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator (thanks for that awesome design). This case will snap together using 7x2.7mm magnets (x8) (I think this is…

Silakka54 Minimal yet Complete Case

This is a living project, meaning, I make improvements all the time. You will have access to all iterations of the case. * This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! ** This case…

silakka54 Case with Wrist Support

*This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! **This case is specifically designed for the Aliexpress v1.3 PCBs. Other variants might work as well, but those have not been tested.…