IKEA SKADIS Screwdriver Holder – 10 Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screwdriver holder with 10 slots (5 x 6.5 mm, 5 x 10 mm) to mount to an Ikea Skadis pegboard. Easy to print and uses
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ten screwdrivers within reach. A screwdriver holder for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
10 slots: 5 × 6.5 mm and 5 × 10 mm
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Hex Key Holder – labelled, 1.5–10 mm
SKADIS Pliers Holder – for pliers and cutters
SKADIS Drill Bit Index – 19 labelled slots, 1–10 mm
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Tilt Bin – flips open, closes by itself
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!