Hygrometer holder for Sunlu filament dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses the upper Filament hole of the dryer to attach a cheap rectangular hygrometer from Amazon or AliExpress
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As i had spare hygrometers, i came up with the idea to monitor moisture during the drying process in my Sunlu S1. I do not use the upper hole to feed Filament through it, so i used it to screw mount the holder into place.
Designed for the the cheap "Mini Hygrometers" with a size of 48 × 28 mm².
Paid 10€ for 8 of them on Amazon.de
Only downside is, their contrast is getting quite low at 55°C but they still work fine.
Any M4 threaded insert with an outer diameter of 6mm should work, if available choose a longer one as there is only one screw to fix everything.
A simple m4 screw with a self locking nut will work, too i guess
Just clip the Hygrometer into the frame and screw it to the lid of the dryer.
Be careful when tightening the screw as the transparent lid may crack.
I added a printable washer that has a slightly curved side.
Everything should print without supports, i would recommend PETG.
Modeled in Tinkercad, chamfered in Layerling. ;)