Hygrometer holder for Sunlu filament dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses the upper Filament hole of the dryer to attach a cheap rectangular hygrometer from Amazon or AliExpress
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As i had spare hygrometers, i came up with the idea to monitor moisture during the drying process in my Sunlu S1. I do not use the upper hole to feed Filament through it, so i used it to screw mount the holder into place.
Designed for the the cheap "Mini Hygrometers" with a size of 48 × 28 mm².
Paid 10€ for 8 of them on Amazon.de
Only downside is, their contrast is getting quite low at 55°C but they still work fine.
Any M4 threaded insert with an outer diameter of 6mm should work, if available choose a longer one as there is only one screw to fix everything.
A simple m4 screw with a self locking nut will work, too i guess
Just clip the Hygrometer into the frame and screw it to the lid of the dryer.
Be careful when tightening the screw as the transparent lid may crack.
I added a printable washer that has a slightly curved side.
Everything should print without supports, i would recommend PETG.
Modeled in Tinkercad, chamfered in Layerling. ;)