Dowel Jig 18 mm board, 8 mm dowel, 3x32 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self-centring dowel drill jig for 18 mm boards, 8 mm dowels, three holes at 32 mm spacing.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The fences straddle the board, so the holes always land on the centreline. The board thickness, dowel diameter, number of holes, spacing and clearance are fixed in this free file. Optionally, ream the holes or press in brass tubes so they last longer.
Print: PETG or PLA+, 0.2 mm layer, 5 walls, 40% infill, printed top-face down with no supports.
Measure your original part first. Not for parts carrying load, pressure, heat or electricity. Print a fit test before the full part.
Need a part that doesn't exist yet? I design custom replacement parts from your photos and measurements, from €39. See my profile for details. This model and its files stay free here.