1 / 2
Desk Cable Grommet 60 mm Hole - Sleeve and Slotted Cap (PLA/PETG) — zdjęcie 1
1 / 2

Desk Cable Grommet 60 mm Hole - Sleeve and Slotted Cap (PLA/PETG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-part desk cable grommet for a 60 mm hole: sleeve plus slotted cap, printable in PLA or PETG.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A desk cable grommet for a 60 mm hole: a sleeve plus a slotted cap (cap file included as model_cap.stl).

Print settings: PLA or PETG, printed flange down.

Before you print: measure your original part first and print a quick fit test. Not for parts carrying load, pressure, heat or electricity.

Licence: CC BY-NC-ND 4.0, personal non-commercial use.

Need a part that doesn't exist yet? I design custom replacement parts from your photos and measurements, from €39. See my profile for details. This model and its files stay free here.

Tagi