Thrustmaster TH8S Shift Knob - Sportster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thrustmaster TH8S compatible 3d printable shift knob with spatial awareness sensory fins
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for racers who prefer the classical ball shifter with the addition of some sensory fins for better spatial awareness during fast shifting sessions.
The knob is 102mm tall with 53mm ball diameter. The height increases to approximately 113 with the adapter screwed on.
The downloads include:
Sportster shift knob variations
Thrustmaster TH8S mounting adapter
3d Printing
Nozzle Size: 0.4 mm
Non-variable Layer Height: 0.2 mm
Variable Layer Height: 0.2 - 0.10 at the top for smoother top surface, if slicer supports it
Perimeters: 3-5 perimeters, Thrustmaster suggests 5
Shift Knob Infill: 15%, adaptive cubic and aligned rectilinear work well with no brim
Adapter Infill: 100%, Thrustmaster suggestion
Materials: printed model using PETG
Heatbed Sheet Used: Satin, no brim or supports were needed
NOTE: All printers have different tolerances so make sure your printer Z height is calibrated accurately. Otherwise, the shift knob fit when screwed onto the adapter will be off. You can probably also print some thin washers to go between the shift knob and adapter instead of repeatedly printing the shift knob. However, I recommend printing an XYZ 10mm calibration cube and getting your printer's Z height calibrated.