Under-Shelf Key Hook – Clip-On, 3 Angled Pegs, No Screws, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on key and lanyard holder for shelf edges 16/18/22 mm – 3 pegs at 45°, no screws, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
A small key and lanyard holder that clips onto the front edge of a shelf – no drilling, no screws, no tape. Slide it on, hang your keys.
Clip-on, no tools: a C-clip slides over the shelf edge; a small 0.6 mm bump on the lower jaw gives a snug press fit.
3 pegs angled 45° upward: keys, lanyards, badge holders and dog leads slide down to the plate and do not fall off. Pegs Ø7 mm, 22 mm long, 20 mm apart, rounded tips.
Three shelf thicknesses: 16 mm, 18 mm (most common chipboard / IKEA shelves) and 22 mm.
Solid: 3–5 mm walls, no cut-outs, 60 mm wide.
Prints without supports: printed tilted at 45° so the pegs grow straight up – both clip jaws and the bottom of the plate rest on the bed with 45° cut ends. Only the engraved text on the underside bridges (0.9 mm).
Print settings
Orientation: tilted 45°, pegs vertical (as in the 3MF / STL – do not rotate).
0.20 mm layer, 2–3 walls, 15% infill. PLA or PETG. Brim optional.
Bambu Lab A1, PLA, 0.20 mm: 16 mm shelf – 52 min / 20.8 g, 18 mm – 54 min / 21.7 g, 22 mm – 58 min / 22.9 g.
Designed from scratch by bezbajzlu.