1 / 3
Under-Shelf Key Hook – Clip-On, 3 Angled Pegs, No Screws, No Supports — image 1
1 / 3

Under-Shelf Key Hook – Clip-On, 3 Angled Pegs, No Screws, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip-on key and lanyard holder for shelf edges 16/18/22 mm – 3 pegs at 45°, no screws, no supports.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

A small key and lanyard holder that clips onto the front edge of a shelf – no drilling, no screws, no tape. Slide it on, hang your keys.

  • Clip-on, no tools: a C-clip slides over the shelf edge; a small 0.6 mm bump on the lower jaw gives a snug press fit.

  • 3 pegs angled 45° upward: keys, lanyards, badge holders and dog leads slide down to the plate and do not fall off. Pegs Ø7 mm, 22 mm long, 20 mm apart, rounded tips.

  • Three shelf thicknesses: 16 mm, 18 mm (most common chipboard / IKEA shelves) and 22 mm.

  • Solid: 3–5 mm walls, no cut-outs, 60 mm wide.

  • Prints without supports: printed tilted at 45° so the pegs grow straight up – both clip jaws and the bottom of the plate rest on the bed with 45° cut ends. Only the engraved text on the underside bridges (0.9 mm).

Print settings

  • Orientation: tilted 45°, pegs vertical (as in the 3MF / STL – do not rotate).

  • 0.20 mm layer, 2–3 walls, 15% infill. PLA or PETG. Brim optional.

  • Bambu Lab A1, PLA, 0.20 mm: 16 mm shelf – 52 min / 20.8 g, 18 mm – 54 min / 21.7 g, 22 mm – 58 min / 22.9 g.

Designed from scratch by bezbajzlu.

Tags