1 / 9
XL6019 5A Buck Step up converter case enclosure — zdjęcie 1
1 / 9

XL6019 5A Buck Step up converter case enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

XL6019 5A Buck Step up Case

Ocena
0 / 5
Polubienia
6
Pobrania
18
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

XL6019 Buck Step up converter case for various electronics projects

This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing.

I found this little buck step up converter is really handy for running fans of higher voltage on lower voltage supplies , as well as pushing up voltages for running higher voltage LED boards on lower voltage supply, seems to work quite well , you can get a little heatsink as used on TMC2209 driver boards and stick it on the top of the Voltage regulator helps keep it a bit cooler for the more demanding higher amperage projects.


Model Features :

  • Clip on angle vented Lid for air flow and cooling 

  • Raised Board mount for cooling and clearance of legs

  • Simple slots USB-C sized for either usb-c connector or cables. 

  • Easy print with no supports needed

  • Insulates against accidental shorts 

Circuit Board Overview :

XL6019 is a Step Up Voltage converter , supports an input voltage from 3.3V to 35V , variable output voltage upto 40V , maximum 5Amps  , operating temperature -20° to +85°, conversion efficiency 90% 

Can be found here :
AliExpress :
https://s.click.aliexpress.com/e/_c31LXnvN

Or Amazon : 
https://link.amazon/B09Szq7qg

PRINTING :

Material : PETG , ASA , PC , ABS 
Perimeters 2-3 
Infill 25% Gyroid
Supports None

Please leave a LIKE on the model , post a comment or a make to support my free work shared on Printables.

Versions :
looking for something else let me know , more then happy to make or alter models, its my hobby.
If you would like to see any changes or perhaps different plug options such as for XT30's or XT60's ? 

Cheers.

Tagi