Klipper Auto-Eject — Universal Toolhead Bed Clearing System & Plow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Automated bed clearing for Klipper: pushes parts off, verifies with probe, and starts the next print automatically.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Summary:
Turn any Klipper-powered 3D printer into a non-stop automated printing machine.
Klipper Auto-Eject mounts a low-profile blade to your toolhead. When a print finishes:
1. Bed cools down until parts self-release.
2. Blade pushes parts off the bed into a bin (with reduced motor current to prevent mechanical damage).
3. Probe checks that the bed is clear.
4. Next print starts automatically from Moonraker's job queue!
Hardware Needed:
- 4x M3 screws (M3x8mm to M3x12mm)
- 4x M3 nuts
Print Settings:
- Filament: PETG, ABS or ASA (Do not use PLA!)
- Infill: 40% - 50%
- Perimeters: 4 walls
- Supports: None
Assembly & Calibration:
1. Bolt the Mount to the front of your toolhead (or use the strap version).
2. Attach the Arm and Blade using M3 screws and nuts.
3. Use the included printed Blade Gauge to set the blade height roughly 1.5mm above the bed surface.
4. Install the Klipper macros from the GitHub repository below:
Full documentation, web UI, and macro installer: