Modular Photo Frame [10x15cm]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had poor quality photo frame that looked similar but the plastic broke and it wasn't expandable. So I designed my own.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
For standard 10x15 photos.
There's a bit of space for up to 1mm glass/plexi window cover. I didn't use one but If you want extra protection it's there.
No supports required.
Pins and mount can use brim, depending on your print setup.
L shaped pins have a Long and Short side. Short side goes into the side of the frame, Long side into bottom of the frame.
Mounting: 3M Command 17202WHI-4-PTRG Small: https://www.command.pl/3M/pl_PL/p/d/v101778047/
"pin-mount_distance" is for stabilizing the frame flex, it's similar to tape mount but adds thickness of the tape.
You don't need a lot of mounting points. I think it's safe to go for one tape every 12-20 frames.
Inserting photo:
Connecting frames:
As usual I'm adding f3d file, if you'd like to modify it in any way, but beware that I haven't cleaned it in any way, yet, so it might be tricky to figure out what is what.