1 / 4
Spacer for Miner AIO / APX90 NerdQAxe Nerdoctaxe Nexus ETC — zdjęcie 1
1 / 4

Spacer for Miner AIO / APX90 NerdQAxe Nerdoctaxe Nexus ETC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Spacer i made to mount the MSI Mag A15 onto my Nexus Miner. Also works on the Nerdqaxe hydro, Octaxe etc

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

More for the Mining Community..

I didn't have any heatsink springs to hand long enough for the PCB i purchased, so i decided to make some spacers and used some GPU screw springs to take the tension. I printed them in PETG-CF originally but they will also print fine in PLA (Tested).

I also used these on my Air cooled Octaxe running APX90-53 heatsinks

Should work on most miners with PC AIO coolers

Extra parts required - 

Small springs for GPU backplates

Printing - 

Layer Height 0.16

Gyroid infill - 15% but could go lower if you wanted them to compress a bit as well

Countersink face down

Tagi