Spacer for Miner AIO / APX90 NerdQAxe Nerdoctaxe Nexus ETC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Spacer i made to mount the MSI Mag A15 onto my Nexus Miner. Also works on the Nerdqaxe hydro, Octaxe etc
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
More for the Mining Community..
I didn't have any heatsink springs to hand long enough for the PCB i purchased, so i decided to make some spacers and used some GPU screw springs to take the tension. I printed them in PETG-CF originally but they will also print fine in PLA (Tested).
I also used these on my Air cooled Octaxe running APX90-53 heatsinks
Should work on most miners with PC AIO coolers
Extra parts required -
Small springs for GPU backplates
Printing -
Layer Height 0.16
Gyroid infill - 15% but could go lower if you wanted them to compress a bit as well
Countersink face down
