1 / 3
Circular disc PCB cutting jig for Proxxon KS230 circular saw — zdjęcie 1
1 / 3

Circular disc PCB cutting jig for Proxxon KS230 circular saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple jig to cut perfectly circular PCBs (or other flat material) on the Proxxon KS230 miniature circular saw.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A jig to cut a PCB into a perfectly circular disc on the Proxxon KS230 miniature circular saw.

The jig has staggered holes for the axle, each 0.5mm further away from the saw blade, for cutting diameters between 25mm and 124mm in 1mm increments. 

Printing

Printed upside down in PLA, no supports needed.

Usage

The PCB must have a 1mm diameter hole in the centre, either a component hole can be re-used or an otherwise unused hole has to be added. An old 1mm drill bit is used as an axle for the PCB to spin around (pointy side up).

Cut the PCB roughly into shape (handheld) leaving 1-2mm beyond the desired circumference before using the jig. Insert the drill bit into the jig (you might need a hammer to get it in) before sliding the PCB on. Start with one or two increments above the desired diameter, then work your way down. Put a finger on the PCB to stop it from spinning too fast.

For FR4, the diamond coated saw blade (28012) works best; for SRBP, the solid tungsten carbide (28011) or HSS (28020) blades work well.

Tagi